Showing posts with label Physics. Show all posts
Showing posts with label Physics. Show all posts

Monday, January 21, 2013

"The Large" Breaking the Cosmological Principle

Large Quasar Group (LQG)
An international team of astronomers, Using data from the Sloan Digital Sky Survey, has found the largest known structure in the universe - large quasar group (LQG). This LQG is so large that it would take a vehicle travelling at the speed of light some 4 billion years to cross it. For comparison, our own galaxy, the Milky Way, is just a hundred thousand light-years across, while the local supercluster of galaxies in which it's located, the Virgo Cluster, is only a hundred million light-years wide.

Cosmological Principle
The usual models of the Universe in cosmology are built on the assumption of the cosmological principle – assumption of homogeneity after imagined smoothing on some suitably large scale. Models depend on the Robertson–Walker metric assumes the homogeneity of the mass–energy density. Further,  assumes that any property of the Universe ultimately depends on the mass–energy content then homogeneity naturally asserts that any global property of sufficiently large volumes should be the same within the expected statistical variations.

The Milky Way, our galaxy, is separated from its nearest neighbour, the Andromeda Galaxy, by about 0.75 Megaparsecs (Mpc) or 2.5 million light-years. Whole clusters of galaxies can be 2-3 Mpc across but LQGs can be 200 Mpc or more across. Based on the Cosmological Principle and the modern theory of cosmology, calculations suggest that astrophysicists should not be able to find a structure larger than 370 Mpc.

The new discovered LQG has a typical dimension of 500 Mpc, membership of 73 quasars and mean redshift z¯=1.27. In terms of both size and membership, it is the most extreme LQG found in the DR7QSO catalogue for the redshift range 1.0 ≤ z ≤ 1.8. But because it is elongated, its longest dimension is 1240 Mpc (or 4 billion light years) - some 1600 times larger than the distance from the Milky Way to Andromeda.

Implications
  1. The occurrence of structure on Gpc-scales from the Huge-LQG and from galaxies implies that the Universe is not homogeneous on these scales. 
  2. The Huge-LQG would also indicate that there is more dark matter in some directions than in others. Such mass concentrations could conceivably be associated with the cosmic (dark) flows on the scales of ∼100–1000 Mpc. Of particular interest is the possibility raised by Tsagas (2012) that those living within a large-scale cosmic flow could see local acceleration of the expansion within a Universe that is decelerating overall. 

Tuesday, January 15, 2013

Colloid & Colligative Properties

A colloidal system consists of two separate phases: a dispersed phase (or internal phase) and a continuous phase (or dispersion medium) in which the colloid is dispersed. A colloidal system may be solid, liquid, or gas. The dispersed-phase particles have a diameter of between approximately 1 and 1000 nanometers. They are affected largely by the surface chemistry present in the colloid. Because the size of the dispersed phase may be difficult to measure, and because colloids have the appearance of solutions, colloids are sometimes identified and characterized by their physico-chemical and transport properties.

Many of the forces that govern the structure and behaviour of matter, such as excluded volume interactions or electrostatic forces, govern the structure and behaviour of colloidal suspensions. For example, the same techniques used to model ideal gases can be applied to model the behaviour of a hard sphere colloidal suspension. In addition, phase transitions in colloidal suspensions can be studied in real time using optical techniques, and are analogous to phase transitions in liquids.

A sol (溶胶) is a colloidal suspension of very small solid particles in a continuous liquid medium. They are quite stable and show the Tyndall effect. Examples include blood, pigmented ink, and paint.

An emulsion is a mixture of two or more liquids that are normally immiscible (nonmixable or unblendable). The word "emulsion" comes from the Latin word for "to milk", as milk is an emulsion of milk fat and water.

Emulsions do not exhibit a static internal structure. They tend to have a cloudy appearance because the many phase interfaces scatter light as it passes through the emulsion. Emulsions appear white when all light is scattered equally. If the emulsion is dilute enough, higher-frequency and low-wavelength light will be scattered more, and the emulsion will appear bluer - this is called the "Tyndall effect". If the emulsion is concentrated enough, the color will be distorted toward comparatively longer wavelengths, and will appear more yellow. This phenomenon is easily observable when comparing skimmed milk, which contains little fat, to cream, which contains a much higher concentration of milk fat.

Whether an emulsion of oil and water turns into a "water-in-oil" emulsion or an "oil-in-water" emulsion depends on the volume fraction of both phases and the type of emulsifier (surfactant) present. An emulsifier is a substance that stabilizes an emulsion by increasing its kinetic stability. One class of emulsifiers is known as "surface active substances", or surfactants. In general, the Bancroft rule applies. For example, proteins dissolve better in water than in oil, and so tend to form oil-in-water emulsions.

Water-in-oil emulsions are less common in food but still exist:
Butter - an emulsion of water in butterfat

Oil-in-water emulsions are common in food:
Crema (foam) in espresso – coffee oil in water (brewed coffee), unstable emulsion
Mayonnaise and Hollandaise sauce - these are oil-in-water emulsions that are stabilized with egg yolk lecithin. The main emulsifying agent is lecithin. Lecithos is the Greek word for egg yolk. Lecithin (卵磷脂) is a generic term to designate any group of yellow-brownish fatty substances occurring in animal and plant tissues composed of phosphoric acid, choline, fatty acids, glycerol, glycolipids, triglycerides, and phospholipids (e.g., phosphatidylcholine). Phosphatidylcholine (磷脂酰胆碱) occurs in all cellular organisms, being one of the major components of the phospholipid portion of the cell membrane.
  • Mayonnaise (蛋黃醬(法语:mayonnaise),音譯美乃滋,有時又稱沙拉醬、白汁) is a stable emulsion of oil, egg yolk and either vinegar or lemon juice, with many options for embellishment with other herbs and spices. 
  • Hollandaise sauce (荷蘭醬,又稱荷蘭酸辣醬,是一种蛋黄酱) is a mixture of egg yolk and butter, usually seasoned with lemon juice, salt, and a little white pepper or cayenne pepper. 
Some examples of food emulsifiers :
  • Mustard - where a variety of chemicals in the mucilage surrounding the seed hull act as emulsifiers.
  • Proteins
  • Soy lecithin is another emulsifier and thickener
  • DATEM (Diacetyl Tartaric (Acid) Ester of Monoglyceride) - an emulsifier primarily used in baking.
Colligative properties are properties of solutions that depend upon the ratio of the number of solute particles to the number of solvent molecules in a solution. They are independent of the nature of the solute particles, and are due essentially to the dilution of the solvent by the solute. Colligative properties include:
  • Relative lowering of vapor pressure
  • Elevation of boiling point
  • Depression of freezing point
  • Osmotic pressure.
Solute molecules do not fit well in the solvent (freezing) crystal, i.e. substituting a solute for a solvent molecule in the crystal has high enthalpy. For low solute concentrations, the freezing point depression depends solely on the concentration of solute molecules. This is explained by the fact that entropy of the solvent decreases from liquid to solid. When the solute present, the randomness increases (entropy increases) so the solid is harder to form at the normal freezing point. 

In ice cream the solute that depresses the freezing point is sugar (sucrose). The graph below shows nearly 20% of the water is still liquid at -25°C. 
(Ref: http://www.chm.bris.ac.uk/webprojects2003/brown/colligative_effect.html.htm)

When the water freezes the amount of liquid water surrounding the sucrose decreases such that the sugar solution becomes more concentrated. As more ice forms, so the solution becomes more concentrated and its freezing point continues to drop. 

Milk freezing point estimates are used by Dairy Farmers of Ontario (DFO) to indicate
milk with water added. Average milk freezing point is –0.540°Hortvet (H) (-0.523°C). If the freezing point estimate is >-0.530°H in a milk sample a warning is provided to the
producer. At a freezing point test >-0.525°H a financial penalty is imposed on the
producer.
(Ref: http://www.milk.org/Corporate/pdf/Farmers-FreezingPoint.pdf
http://www.nxtbook.com/dawson/gp/milkproducer_201005/index.php?startid=13)

Wednesday, March 4, 2009

Development of the Theory of Superconductivity (BCS)

[Mahan] Many-Particle Physics, Gerald D. Mahan, 2nd ed., Plenum, 1990.

[TIN] Introduction to Superconductivity, Michael Tinkham, 2nd ed., McGraw-Hill Internation Ed, 1996.

[BCS] Theory of Superconductivity, J. Bardeen, L.N. Cooper, and J.R. Schrieffer, Phys Rev, 108, 1175 (1957). (the famous BCS Theory)

Wikipedia references: J. Bardeen, L. Cooper, and J.R. Schrieffer.

1911

[BCS] Superconductivity was discovered by Onnes.


1928

[BCS] The Sommerfeld-Bloch individual-particle model gives a fairly good description of normal metals, but fails to account for superconductivity. In this theory, it is assumed that in first approximation one may neglect correlations between the positions of the electrons and assume that each electron moves independently in some sort of self-consistent field determined by the other conduction electrons and the ions. Wave functions of the metal as a whole are designated by occupation of Bloch individual-particle states of energy ε(k) defined by wave vector k and spin σ; in the ground state all levels with energies below the Fermi energy, εF, are occupied; those above are unoccupied.


1933

[BCS] A major advance was the discovery of the Meissner effect, which showed that a superconductor is a perfect diamagnet; magnetic flux is excluded from all but a thin penetration region near the surface.



1934

[BCS] Of the various two-fluid models used to describe the thermal properties, the first and best known is that of Gorter and Casimir, which yields a parabolic critical field curve and an electronic specific heat varying as T3.


1935

[BCS] London and London proposed a phenomenological theory of electromagnetic properties in which diamagnetic aspects were assumed basic. F. London suggested a quantum-theoretic approach to a theory in which it was assumed that there is somehow a coherence or rigidity in the superconducting state such that the wave functions are not modified very much when a magnetic field is applied.


1950

[Mahan] Fröhlich was the first to realize that electrons could interact by exchanging phonons and that this interaction could be attractive. He was the first to suggest that superconductivity was caused by the electron-phonon interaction.

[Mahan] The isotope effect verified the Fröhlich hypothesis that the electron-phonon interaction caused superconductivity. The isotope effect was discovered for the metal Hg by Maxwell and Reynolds et al.

[BCS] Fröhlich's theory, which makes use of a perturbation-theoretical approach, does give the correct isotopic mass dependence for H0, the critical field at T = 0K, but does not yield a phase with superconducting properties and further, the energy difference between what is supposed to correspond to normal and superconducting phases is far too large.

[BCS] A variational approach by J. Bardeen (1950, 1951) ran into similar difficulties. Both theories are based primarily on the self-energy of the electrons in the phonon field rather than on the true interaction between electrons, although it was recognized that the latter might be important (1951).


1952

[Mahan] The electron-phonon interaction gives a scattering from a Bloch state defined by the wave vector k to k' = k ± x by absorption or emission of a phonon of wave vector x. It is this interaction which is responsible for thermal scattering. Its contribution to the energy can be estimated by making a canonical transformation which eliminates the linear electron-phonon interaction terms from the Hamiltonian. In second order, there is one term which gives a renormalization of the phonon frequencies, and another, H2, which gives a true interaction between electrons, independent of the vibrational amplitudes. A transformation of this sort was given first by Fröhlich in a formulation in which Coulomb interactions between electrons were disregarded.


1953

[BCS] The concept of coherence has been emphasized by A.B. Pippard, who, on the basis of experiments on penetration phenomena, proposed a nonlocal modification of the London equations in which a coherence distance ξ0 is introduced. The current density at a point is given by an integral of the vector potential over a region surrounding the point. ξ0 is of the order of 10-4 cm in a pure metal. For a very slowly varying A, the Pippard expression reduces to the London form.

[BCS] Nakajima showed how such interactions could be included. Particular for the long-wavelength part of the interaction, it is important to take into account the screening of the Coulomb field of any one electron by other conduction electrons.

[BCS] Two-fluid models which yield an energy gap and an exponential specific heat curve at low temperatures have been discussed by Ginsburg and Bernardes (1957).


1955

[Mahan] Schafroth showed that a charged boson gas, when undergoing a Bose-Einstein condensation, would exhibit many of the superconducting properties - but not those known now, such as the energy gap in the excitation spectrum.

[BCS] Blatt, Butler, and Schafroth, have introduced the concept of a "correlation length," roughly the distance over which the momenta of a pair of particles are correlated (not to be confused with Pippard's coherence distance). M.R. Schafroth has argued that there is a true Meissner effect only if the correlation length is effectively infinite. In BCS theory (1957), the correlation length is most reasonably interpreted as the distance over which the momentum of virtual pairs is the same. The authors of BCS believed that in this sense, the correlation length is effectively infinite. The value of q is exactly zero everywhere in a simply connected body in external field. When there is current flow, as in a torus, there is unique distribution of q values for minimum free energy.

[BCS] The average velocity, v0, of electrons at the Fermi surface, is required for penetration phenomena. As pointed out by Faber and Pippard, this parameter is most conveniently determined from measurements of the anomalous skin effect in normal metals in the high-frequency limit. Faber and Pippard suggested that if ξ0 is written as ξ0 = a h v0 / kTc , the dimensionless constant a has approximately the same value for all superconductors and they find it equal to about 0.15 for Sn and Al.

[BCS] J. Bardeen pointed out that an energy-gap model would most likely lead to the Pippard version, and we found this is to be true of the present theory. Our theory of the diamagnetic aspects thus follows along the general lines suggested by London and by Pippard.

[BCS] Such effects (screening effect of above) are included in a more complete analysis by Bardeen and Pines, based on the Bohm-Pines collective model, in which plasma modes are introduced for long wavelengths.


1956

[Mahan] The first inkling of the BCS theory was a letter by Cooper who pointed out that the ground state of a normal metal was unstable at zero temperature. We define a normal state as one which is neither superconducting nor magnetic. The instability is an indication that the metal prefers to be in another state, in this case the superconducting.

[TIN] The basic idea that even a weak attraction can bind pairs of electrons into a bound state was presented by Cooper in 1956. He showed that the Fermi sea of electrons is unstable against the formation of at least one bound pair, regardless of how weak the interaction is, so long as it is attractive. This result is a consequence of the Fermi statistics and of the existence of the Fermi-sea background, since it is well known that binding does not ordinarily occur in the two-body problem in the three dimensions until the strength of the potential exceeds a finite threshold value.

[BCS] From analysis of data on transmission of microwave and far infrared radiation through superconducting films of tin and lead, Glover and Tinkham find a = 0.27.

[BCS] To obtain the ground state function, we observe that the interaction Hamiltonian connects a large number of nearly degenerate occupation number configurations with each other via nonzero matrix elements. If the matrix elements were all negative in sign, one could obtain a state with low energy by forming a linear combination of the basis functions with expansion coefficients of the same sign. The magnitude of the interaction energy obtained in this manner would be approximately given by the number of configurations which connect to a given typical configurations which connect to a given typical configuration times an average matrix element. This was demonstrated by one of our authors (L.N. Cooper, Phys. Rev. 104, 1189 (1956)) by solving a problem in which two electrons with zero total momentum interact via constant negative matrix elements in a small shell above the Fermi surface. It was shown that the ground state of this system is separated from the continuum by a volume independent energy. This type of coherent mixing of Bloch states produces a state with qualitatively different properties from the original states.


1957

[Mahan] BCS Theory successfully describes the superconducting properties of weak superconductors such as aluminum.

[BCS] In a preliminary communication (Phys Rev 106, 162 (1957)), we gave as a criterion for the occurrence of a superconducting phase that for transitions such as Δε < hω, the attractive H2 dominate the repulsive short-range screened Coulomb interaction between electrons, so as to give a net attraction. We showed that how an attractive interaction of this sort can give rise to a cooperative many-particle state which is lower in energy than the normal state by an amount proportional to (hω)2, consistent with the isotope effect.

[BCS] In the theory, the normal state is described by the Bloch individual-particle model. The ground-state wave function of a superconductor is formed by taking a linear combination of many low-lying normal state configurations in which the Bloch states are virtually occupied in pairs of opposite spin and momentum. If the state k↑ is occupied in any configuration, -k↓ is also occupied. The average excitation energy of the virtual pairs above the Fermi sea is of the order of kTc.

[BCS] Excited states of the superconductor are formed by specifying occupation of certain Bloch states and by using all the rest to form a linear combination of virtual pair configurations. There is thus a one-ton-one correspondence between excited states of the normal and superconducting phases.

[BCS] Our theory also accounts in a qualitative way for those aspect of superconductivity associated with infinite conductivity and a persistent current flowing in a ring. When there is a net current flow, the paired states ( k1↑, k2↓) have a net momentum k1+ k2 = q, where q is the same for all virtual pair states, and so can only produce fluctuations about the current determined by q. Nearly all fluctuations will increase the free energy; only those which involves a majority of the electrons so as to change the common q can decrease the free energy. These latter are presumably extremely rare, so that the metastable current carrying state can persist indefinitely.

[BCS] Our picture differs from that of Schafroth, Butler, and Blatt, who suggest that pseudo-molecules of pairs of electrons of opposite spin are formed. They show if the size of the pseudo-molecules is less than the average distance between them, and if other conditions are fulfilled, the system has properties similar to that of a charged Bose-Einstein gas, including a Meissner effect and a critical temperature of condensation. Our pairs are not localized in this sense, and our transition is not analogous to Bose-Einstein condensation.

[BCS] Our theory is based on a rather idealized model in which anisotropic effects are neglected. It contains three parameters, two corresponding to N(εF) and v0, and one dependent on the electron-phonon interaction which determines Tc.

[BCS] We neglect the effects of the momentum dependent cutoff on the expression for the current density; as shown explicitly by P.W. Anderson (private communication) errors introduced are negligible in the weak coupling limit. ... We assume the collective excitations make a negligible contribution to the current form A0 (J. Bardeen, Nuovo Cimento 5, 1766 (1957)).

[BCS] Another problem, not yet solved, is the calculation of the paramagnetic susceptibility of the electrons in a superconductor, such as is required to account for Reif's (Phys. Rev. 106, 208 (1957)) data on the Knight shift in the nuclear paramagnetic resonance of colloidal mercury. Our ground state is for total spin S = 0. It is possible to construct states analogous to those used in spin-wave theory in which each virtual pair has a small net spin, and for which the energy varies continuously with S.

[BCS] We would like to mention particularly discussion with C.P. Slitchter and L.C. Hebel on calculation of matrix elements, with D. Pines on the criterion for superconductivity, and with K.A. Brueckner on the exactness of the solution for the ground state.


1960

[Mahan] Further refinements of the theory had led to the strong coupling theory of Eliashberg which describes well the properties of strong superconductors such as lead. The paired electrons behave, in some respects, as bosons.

[Mahan] The observation of the energy gap in the excitation spectrum by electron tunneling done by Giaever provided a dramatic verification of the BCS theory.


1962

[Mahan] Josephson predicted the coherent tunneling of pairs, which was also quickly observed. These experiments provide a detailed verification of the BCS theory.

[Mahan] Cohen et al introduced the concept of the tunneling Hamiltonian, which became universally adopted for the discussion of tunneling in superconductors.


1963

[Mahan] Balian and Werthamer solved the BCS equations for S=1, showed that the triplet state had smaller binding energy and was therefore less favored. (However, the recent of superfluidity in He3 are based on the premise that the pairing occurs in the triplet state. Thus triplet pairing is possible and may exist in heavy fermion solids such as UPt3 and UBe13. )


1964 - 1965

[Mahan] An extensive comparison between the theory and experiment is provided in two volumes of Superconductivity edited by R.D. Parks (1965) and in the books by Rickayzen and Schrieffer (1964).


1968

[Mahan] The distinction between weak and strong is roughly given by the value of the electron-phonon mass enhancement factor λ, as shown by McMillan.

Tuesday, June 3, 2008

Plasma Effects on Polymers

The interactions between polymers and plasmas and UV radiation taking places in both vacuum coating processes and hardening of sol-gels (wet-chemical coating). Reactions on polymer surfaces can be caused by high-energy electrons, ions, and neutrals, as well as by electromagnetic radiation in the deep ultra-violet (VUV, wavelength < 180 nm). The treatments cause chain scission, ablation, cross-linking, and oxidation to a depth of 5-50 nm. Important plasma parameters for a treatment are the plasma excitation frequency, the gas pressure and composition, and the treatment time.

Plasma treatments are able to introduce polar oxygen groups even if carried out in inert gases. The polymer radicals formed during the treatments are long-lived and typically react with water or oxygen from the gas background. An adhesion improvement by plasma treatments has been attributed variously to improved wettability, to surface cross-linking, or to interfacial diffusion.

The degradation of polymers caused by environmental UV radiation is the cause of yellowing of many polymer materials. In particular, polycarbonates are prone to yellowing, whereas polyacrylates are more stable to environmental radiation. The discoloration is due to photo-oxidation reactions.
Polycarbonate


Electromagnetic radiation at wavelength below 200 nm has enough energy to break polymer bond, and the photon energy of wavelength below 120 nm is sufficient to ionize most organic materials. Important for coating processes is VUV radiation at wavelength below 180 nm. Argon in a plasma shows primarily VUV emissions below 160 nm due to energy transfer from excited-state argon metastables to hydrogen from water and organic materials. Studies show that cross-linking reactions during low-pressure plasma treatments are mainly initiated by VUV radiation. Cross-linking reactions dominate on polymers containing at least one hydrogen atom bonded to adjoining carbon atoms. This is find in the thermoplastics like polyethylene, polypropylene, polystyrene, and polyamide. For PMMA and other acrylics, scission of bonds and the formation of weakly bonded layers is found after different plasma treatments.
Acrylate polymer - PMMA


Antireflective (AR) coating design for plastics
Special requirements have to be taken into account in the design of AR coatings for plastics:
  • The layer materials have to be selected in order to achieve radiation protection of interfaces or of the bulk polymer dependent on the polymer substrate type.
  • The layer materials and thicknesses have to be adjusted considering the mechanical and thermal film stresses and the total heat development during the deposition process.
  • Designs should be suitable for integrating additional functions like improved scratch resistance, barrier function, antistatic function, or hydrophobic properties.
  • Sometimes changed optical properties of interfacial zones due to plasma treatments have to be taken into account for design calculations.

Plastic eyeglasses have to be pass rigorous environmental and abrasion tests. AR layers which is preferred in quarter-half-quarter design, and hydrophobic top coatings are arranged on top of hard coatings several micrometers thick. Usually, the hard coatings are lacquers based on silanols, or organic-modified silica layers applied by vacuum deposition processes. These hard coated surfaces act as the substrate so that the vacuum deposition of the AR coating does not have to be done on the more sensitive polymer itself. AR coatings produced using wet-chemical processes comprise mainly single-layer and two-layer systems.

Wednesday, March 12, 2008

3-0-0 Puzzles

Particles and Antiparticles
Associated with any particle is the corresponding antiparticle. Theoretically, the existence of antiparticles has been shown to be a consequence of the theory of quantum mechanics combined with Einstein's theory of relativity. It is known under the name CPT theorem. An antiparticle can be defined by the fact that if taken together with the particle one obtains something that has no properties except energy. No charge, no spin, nothing.

A particle may be equal to its antiparticle. An example of such a "self-conjugate" particle is the photon. Another example is the π0 which is a spinless bound state of a quark and an antiquark. Not only elementary particles have antiparticles, but also non-elementary particles, such as the proton, have their anti-companion. They are simply made up from the corresponding antiparticles.

The W+ and W- are each other’s antiparticles. The photon and the Z0 are their own antiparticles, and the antiparticle of any gluon is simple another one of the gluons. For example, the anti-version of the red-antiblue gluon is the blue-antired gluon. The graviton (zero mass) is its own antiparticle. This is the only known spin 2 particle. Although the gravitational field is of course well known, it has not been observed directly.

Neutrino
If the particle has no mass and moves with the speed of light then “handedness” is not a relative statement. You have particles that are always left-handed. If it is massless than the neutrino is such a particle. The interactions are such that always a left-handed particle is emitted, i.e. the spin is always counter-clockwise in the direction of motion. The antiparticle is always right-handed. The spin flips direction when passing from particle to antiparticle.

If you see a particle decaying into a neutrino / antineutrino pair (flying off in opposite directions) then you know that the particle has spin 1. Thinking in an opposite way, when you collide a neutrino with an antineutrino in the opposite direction the spins point in the same direction. There is actually such a spin 1 particle, called the Z0. It indeed decays some of the time into a neutrino-antineutrino pair. These statements are subject to change if it is found that neutrino have mass, and thus do not move at the speed of light. In that case you could, by going faster than the neutrino, turn a left-handed neutrino into a right-handed one.

Despite the fact that neutrinos are neutral the antineutrinos are different from the neutrinos: they are not their own antiparticle. They have different handedness. Furthermore, neutrinos have lepton number 1, and antineutrinos have lepton number -1, which means that some reactions are possible with neutrinos but not with antineutrinos and vice versa.

Elementary puzzles
Color of three
The greatest puzzle of elementary particle physics today is why are three families? Having only three families and no more makes it virtually impossible to see them as bound states. A further problem is presented by the three neutrinos. For all we know their masses are zero (or very nearly so). The difficulty is that no one knows of any way to have a bound state such that the mass of that state is zero. Up to now most people thought that neutrinos are massless, but certain recent experimental facts suggest that neutrinos have (small) masses. If so these masses are less than the known limits.

Masses
Here is another major problem of elementary particle physics. Where do all these masses come from? Why is the top-quark so incredibly heavy? Why are neutrinos massless (if they were)?

Spin 0 - Higgs boson
Experimentally we have never encountered any elementary particle that has spin zero. There is a hypothetical particle, the Higgs boson, that supposedly has spin zero, but this particle has not been observed so far.

Monday, March 10, 2008

Missing Mass

According to the Standard Model, except gravity, forces that govern the matters and particles are summarized in the diagram at below.



The model does not explain where is the mass come from and there are also eighteen numerical parameters that must be put "by hand" into the theory.

We are looking forward to see the results coming from the Large Hadron Collider (LHC). When activated, it is theorized that the collider will produce the Higgs boson. The Higgs boson may help to explain how elementary particles acquire properties such as mass. The project also planned to study various interesting phenomena such as strangelets, micro black holes, magnetic monopoles, and supersymmetric particles.